Professional Solution to Damp Caused by Plumbing Damage

Professional Solution to Damp Caused by Plumbing Damage

Are your walls damp and peeling off? Wet walls may be a sign of a major problem, from water leakage to severe issues with the roof or foundations. Damp and mould are caused by excess moisture which can damage your property if not attended to on time.

Walls are not the only aspect of a building vulnerable to damp. Floors can also suffer from moisture intake and penetration in equal measure.

Penetrating and rising damp need to be treated as soon as possible to maintain the structural integrity of your building.

    Plumbing Quote!





    Since yearXXX, Hampshire Plumbers has solved damp problems in many Hampshire homes. Our specialists can detect and treat penetrating and rising damp.

    The best way to insure you have the perfect damp remedy in your Hampshire home is to contact the professionals at Hampshire Plumbers for a free quote. Click now to get help and advice from experienced and qualified experts on damp problems.

    Causes of Mould and Damp Problems

    Mold and other dangerous spores cannot live without water. The first step to solve the problem of mold or mildew in a household is to determine the source of moisture. In most cases, the problem is caused by excessive moisture accumulation in walls, ceilings, or other surfaces. Difficulty arises when water is trapped in the walls due to a leaky pipe.

    Signs of Mould and Damp

    If the ceiling shows signs of damage by dripping water, check one of two home systems: roof system or sanitary system. Water dripping from the ceiling, visible signs of damage to plasterboard, or damage to plaster overhead are not something to be underestimated. There may be a lot more water than you can see, and ignoring the leak can cause structural damage, mold, and mildew growth. Leaks on the ceiling can be marked with dripping water. However, before the problem gets to this point, bubbles, peeling paint, or discoloration may appear in one spot of the ceiling.

    How to Prevent Further Damage

    Regardless of the cause of the leakage from the ceiling, when you first notice discoloration or signs of dripping water, remember that drywall may contain much more hidden water. You can minimize further damage and avoid frequent replacement of the ceiling surface by drilling a hole in the center of the damaged area, allowing the pool water to drain into the bucket. Damp plasterboard dries well if you pour water quickly. However, if water accumulates for a long time, the paper substrate will dissolve or become mold.

    Causes of Penetrating Damp

    In some cases, excessively absorbent materials, such as soft sandstone, are saturated by rain or overflow, and they can damp internal surfaces. Vines or other vegetative materials can grow directly on building materials without grates or other scaffolding; this can cause root damage that destroys joints and foundations. Moisture can be pressed against the surface. In most cases, you may need to consider a variety of options, including removing vegetation from buildings, repairing damaged materials, replacing covers, repairing downpipes, repainting mortar, sealing peripheral joints of windows and doors, or repainting surfaces. Limit the penetration of unwanted moisture from outside to buildings above average. 

    Excessive moisture in foundations is often the result of poorly managed rainwater, but it can also be caused by the ingress of groundwater, leaks in pipes, hot ventilation, moist air, water in building materials (such as concrete), or exposed floors (e.g. Saturated). Stone pebbles, perforated drainage pipes, sand and gravel, or proprietary drainage mats are used in drainage systems. Stone pebbles and perforated pipes are usually enclosed in filter cloth to prevent clogging with fine dirt particles. Water problems arise when rainwater collected on the roof is drained to the ground next to the foundation. 

    One of the most common sources of moisture are faulty pipes and drains. Small leaks can occur on old pipes, shower trays, or on the back of toilets; this can remain unnoticed for years until the floorboards begin to rot. Leaks in hidden pipes behind kitchen elements are often detected only after replacing the elements. At this time, the wooden floors may have deteriorated significantly.

    Damp Proofing Experts in Hampshire

    Hampshire Plumbing is made up of specialists in moisture protection in Hampshire. 

    Hampshire Plumbing is the focal point for repair, maintenance, and improvement of commercial or private properties in Hampshire.

    We also offer a 24-hour emergency call-in service in case of problems with plumbing, drains, or roofs; we also deal with moisture problems.

    Call 0800568493 now.

    What Causes Damp?

    Damp occurs when there is unwanted moisture in the air that cannot escape.

    Excessive damp can be caused by steam from cooking, drying the laundry at home, and using the shower or bath.

    Buildings that easily get flooded can experience damp problems.

    The most common factors that allow damp to penetrate an object include poor ventilation, a leaking roof, poor damp proofing, and installation problems (such as a leaking washing machine or dishwasher).

    WHY CHOOSE US

    Penetrating Damp

    This is due to problems with the building or pipeline through which water has entered the property.

    This may be due to incorrect alignment, cracks in the wall, damaged water supply systems, broken gutters, faulty pipes, broken downpipes, or possibly elevated floor levels on the property’s walls. It can also be caused by installing a flower bed.

    Damp Problem Caused by Burst Pipes

    As a result of freezing temperatures, the number of floods and damp problems caused by bursting pipes and frozen pipes can increase.

    Bursting pipes can cause serious water damage, not only due to the content of the building but also due to the construction of the property.

    Due to a broken water pipe, the property must be thoroughly dried and effectively cleaned in order to avoid future problems (such as wet and dry rot).

    How to Prevent Damp Problems

    Check pipes, sealants, and repair leaks; leaky pipes must be repaired as soon as they are detected; thereafter, they need to be checked regularly.

    Also, you should check for leaks around the sink, bathtub, and shower to ensure that water is not dripping from any of these places.

    Our experts will solve them in no time.

    Have Any Household Problems?

    A Summary of our Plumbing Services Related to this page

    • plumbing problems
    • defective plumbing
    • plumbing nightmare
    • damp problems
    • leaking gutters
    • leaking washing machine
    • bathroom plumbing
    • washer dripping taps
    • bathroom sinks
    • leaking pipes
    • corroded water pipes
    • condensation dampness
    • damp issue
    • failing waste pipes
    • indoor dampness
    • blocked drains
    • leaking radiator valve
    • damp walls
    • existing damp issues
    • moisture control system
    • rising damp
    • burst water pipe
    • damp timber
    • mould spores
    • burst pipe
    • cement render
    • window frames
    • water ingress
    • black mould
    • floor level
    • tumble dryers
    • excess moisture
    • central heating
    • skirting boards
    • common causes
    • damp proofing
    • double glazing
    • damp patches
    • musty smell
    • water vapour