Plumbing FAQ's

Plumbing FAQ's

Plumbing problems can be incredibly irritating, especially if it means you can’t use your toilet, drain, shower or any of the above.

It’s best to be prepared to take a proactive measure for whatever comes your way. That’s why we’ve built this list of commonly asked questions about plumbing to get you the plumbing advice you need on a number of subjects.

These are some of the questions we get from our clients. We felt it would be helpful for all of our clients and website users to have a section for such queries.

We give answers to questions like how to shut off the tap if your toilet is overflowing, what no to put in your sink, and so on. Simply scroll down to find your question, and then click to show the answer.

    Call Back Quotation

    If you have any other concerns about plumbing repairs and maintenance and would like to ask a plumber, our professional and highly trained technicians are happy to assist.

    Plumbing Questions

    Low water pressure is often associated with other basic installation problems, such as clogged drains or leaking taps. Checking the aerator on the taps can be a quick solution. Sometimes there may be a serious problem with water pipes serviced by your local water company. You can try calling them to see if this is a problem before you have to pay a plumbers bill.

    Many households still use large gas water heaters to provide hot water to taps and showerheads at home. You know you have a gas water heater if there is a huge water tank somewhere on your property, probably in the basement or garage. Please note that a gas supply problem may indicate a gas leak. Always call a professional installer to safely repair gas water heaters. The gas water heater uses a large water tank, heats it all day and transfers it to the pipes as needed.

    Preventive maintenance is the best way to extend the life of your water heater. Take time for an annual check to make sure that the water heater is working effectively. In particular, there are some basic requirements for water heaters that allow water to be heated for a long and successful life. 

    It is important to empty the water heater every month to remove the build-up of sludge and extend the life of the water heater. If left unattended, water heaters will become less efficient because of the sludge forming a barrier between the burner and the water. It is also a good idea for the plumber to check the kettle for signs of corrosion and leaks every few years.

    Good plumbing can solve hard water problems with a variety of high-quality home products.

    If there is an electric water heater in the house, then a sudden lack of hot water is probably associated with faulty electrical equipment in the radiator. The thermostat regulates the temperature of the water flowing through the water heater. A faulty thermostat can heat the water to a temperature much lower than one selected. Another common source of cold water flowing from an electric water heater is an emergency stop switch. The instant water heater consumes electricity like a large appliance, so it can put too much pressure on the circuit breaker and release it. 

    The two blockages that can cause the most damage to the plumbing are bathroom hair and kitchen fat, although soap, detergents and many other materials can cause blockages and slow drainage. Campaigns have been ongoing for years to raise people’s awareness of the dangers of fat, oil or fat. It sticks to the sides of drain pipes and accumulates, to the point where it stops the flow of water and can cause destruction not only in private homes but throughout the entire public system.

    Leaks can occur in many places around the home and cause costly problems, not to mention health hazards. Hidden leaks increase water bills and can eventually damage your home. Imagine a water leak in the walls – over time, it causes more and more damage, destroys drywalls and/or floors and eventually causes mould.

    The age of your pipes, the condition of your pipes and sewers, and drainage habits can all play a role in poor drainage. If your drainpipe is made of concrete, clay or a transport pipe, there may be constant problems, such as unclosed joints.

    Hampshire Plumbing is a plumbing services company in Hampshire that offers services in residential plumbing, domestic repairs and industrial plumbing.

    Choose Hampshire Plumbing when your plumbing stops. Call PHONEXXX and request an estimate for fast plumbing repair in the Hampshire area.

    We understand that problems arise after office hours.

    If you would like to contact Hampshire Plumbing for general installation or troubleshooting questions outside of business hours, please write EMAILXXX.

    We regularly check our emails and respond as soon as possible.

    At Hampshire Plumbing, we don’t leave you in the dark when it comes to plumbing solutions

    Before choosing a procedure, we take the time to thoroughly explain our recommendations. We listen to your requests and concerns and ensure that we answer all your questions about our plumbing solutions

    Hampshire has experienced installers in the field of plumbing and offers the best quality plumbing in Hampshire.

    We are a local business and have been a trusted Hampshire plumbing source for almost a decade.

    Contact us today to get a free quote for your commercial plumbing project

    Plumbing Faqs

    Which water heater is right for you and your family depends on the specific situation and details of your home. Our experts will help you evaluate the water heater options and help you decide which type of water heater you want to buy. Flow heaters that are placed outdoors can reliably provide you and your family with hot water, even when temperatures are below freezing.

    If you lack hot water, are getting too little hot water, noticing unusual noises or smells from the water heater or observe obvious signs of leakage, it’s probably time to have the water heater checked by a specialist. At Hampshire Plumbing we can help you repair, replace and install new systems. Our technicians will help you choose the right size and type of water heater for your home.

    If there is a gas water heater in the house, the riser (a vertical pipe connecting a tap or showerhead to the water stop valve) is the most common reason for running out of hot water. The immersion tube is a tube that directs cold water to the bottom of the heated tank. Over time, this hose may shorten, causing cold water to mix with hot water faster than it should.

    Deposits accumulating at the bottom of the tank make it difficult for the burner to heat the water. Flushing the water heater every few months extends its service life and helps reduce the amount of sediment particles that enter the fittings, especially aerators and showerheads. Even a small leak (drop) will eventually rust outside the tank wall and cause the heater to malfunction. 

    A rumbling sound may indicate that sediment has accumulated at the bottom of the water heater. You can try to drain a few litres of water from the bottom of the water heater tank. Many newer models of water heaters have a new feature that prevents the accumulation of deposits in the tank.

    Water pressure measures the power of water that flows from the taps and showerheads. Low water pressure can be a sign of a problem with the water pipe or deposits in the tap or showerhead. Remove the showerhead to look for blockages or debris that may have accumulated. Slow drainage is usually a sign of drainage or pipe clogging. 

    A drop in water pressure is usually a sign of a problem somewhere in your sanitary system. However, if your home has an overall low water pressure, there is a system problem. The most serious and probably costly reason for the low water pressure is old galvanized steel pipes that are so corroded that they drastically reduce the amount of water that can flow into and out of the house. With the age of these pipes, the diameter of the pipe will be gradually reduced due to the formation of corrosion and deposits, and you will need to call a trained team to replace them and repair the damage.

    Kitchen sinks are usually clogged with fat that has cooled and expanded in the pipes. The best way to avoid problems with the kitchen installation is to protect the sink from clogging by not allowing grease to flow into the drain.

    The best solution for blockages, leaks, low water pressure and intrusive roots is to call a plumber. DIY solutions can temporarily solve some problems, but a plumbing specialist has the experience and tools to repair a hydraulic system. 

    Some skill level is required to perform most of the tasks required to repair piping. Disassembly, repair and reassembly of plumbing infrastructure is something that most people generally do not do. The number of skills required to complete the plumbing installation may be out of your reach. Replacing the toilet, repairing a leaking pipe or installing a new water heater requires specialised knowledge.

    A summary of our Plumbing Services related to this page

    • general plumbing questions
    • plumbing repair experts
    • plumbing recommendations
    • Commercial Plumbing solutions
    • Commercial plumbing installations
    • plumbing problems
    • experienced plumbing contractor
    • larger plumbing issues
    • plumbing qualifications
    • plumbing system
    • Emergency Plumbing
    • plumbing project
    • best plumbing
    • plumbing appointments
    • plumbing courses
    • plumbing work
    • best plumbing services
    • simple drain cleaning
    • 24-hour emergency plumbing service
    • Express Plumbing
    • plumbing systems
    • current Plumbing
    • plumbing pipes
    • Plumbing Design
    • domestic plumbing
    • Experienced plumbers
    • plumbing franchise
    • Emergency Insurance Plumbing
    • plumbing industry
    • wastewater system
    • Plumbing Engineers
    • local plumbing businesses
    • wastewater treatment
    • plumbing course
    • plumbing apprenticeships
    • local plumbing employers
    • drainage professionals
    • plumbing leak
    • employee status plumbing apprentice
    • average plumber